1. To avoid the motor burning out, do not use voltage higher than
specified.
2.
To avoid the influence on rotating speed and output, do not have
any magnetic parts near to the frame of the motor.
3.
To avoid dangers caused by jamming, keep your hands, hair and
all loose items of clothing or fabric away from the motor when it is
running.
4. This product is designed according to IP44, it is resistant to dust and
moisture, but cannot be immersed in water.
5. After heavy use under load the temperature of the motors might rise
to 100 degrees Celsius or above. Do not touch the motor without any
protection and keep fusible materials away from it.
6. Any impact on the motor, especially on the shaft, could damage the
concentricity or break the magnets of the motor.
7.
The motor cannot be used near flammable gases, vapours or liquids.
EMI REGULATION CONFORMITY
The Greencare EP1C wheelchair has been successfully tested in accordance
with international standards as to its compliance with Electromagnetic
Interference (EMI) regulations. However, electromagnetic fields, such as
those generated by radio and television transmitters, and cellular phones,
can influence the functions of the electric vehicles. Also, the electronics used
in our wheelchairs can generate a low level of electromagnetic interference,
which however will remain within the tolerances permitted by law.
BEWARE:
• Do not switch on or operate portable transceivers or communication
devices (such as radio transceivers or cellular telephones) when the
vehicle is switched on.
• Avoid getting too close to strong radio and television transmitters.
• In case the wheelchair should be set in motion unintentionally switch
the chair power off immediately.
• Adding electrical accessories and other components or modifying
the wheelchair in any way can make it susceptible to electromagnetic
interference.
46
