Error indications
If there is an error with the system when it is powered up, then
the status
Indicator will flash red; the number of flashes will indicate the
type of error.
The table below describes the error indication, and a few possible actions
that can be taken to rectify the problem. The actions listed are not in any
particular order and are suggestions only; the intention is that one of the
suggestions May help you clear the problem. If in doubt, consult your supplier.
Flash
code
Error description
Possible action
1
Remote / joystick error
Check cables and connectors
Replace remote
2
Network or
configuration error
Check cables and connectors
Check bluetooth pairing
Reconfigure the system
Recharge the battery
Check charger
Replace modules
Contact supplier
3
Left motor error
Check cables and connectors
Replace power module
Check and/or replace left motor
3
Right motor error
Check cables and connectors
Replace power module
Check and/or replace right motor
5
Left park brake error
Check cables and connectors
Check leftt park brake is released
6
Right park brake error
Check cables and connectors
Check right park brake is released
7
Module error
(other than remote)
Check cables and connectors
Check modules
Replace LiNX Access Key
Replace Power Module
Recharge battery
If the chair is stalled, reverse away or
remove obstacles, or if the chair was
moved while turned off, cycle the power.
47