4 ADJUSTMENTS
Inc. All rights reserved
14
4.1.2. CHANGING THE ANGLE OF THE ADJUSTABLE ANGLE FOOT
SUPPORT, SINGLE AND FULL WIDTH
1 - Loosen the screws (
A
) with a 10 mm open-end wrench.
2 - Reposition the plates at the desired angle and firmly tighten the screws (
A
) (140 psi).
4.1.3. CHANGING THE POSITION (DEPTH) OF THE ADJUSTABLE ANGLE
FOOT SUPPORT
1 - Unscrew the 2 Phillips screws (
A
) and remove the end cap (
B
).
2 - Pull the plate to release it from the plate support (
C
).
3 - Reposition the plate to the desired depth and replace the end cap (
B
) and screws (
A
).
