4 ADJUSTMENTS
Inc. All rights reserved
17
4.1.7. ADJUSTING THE FLAT PADDED LOWER LEG SUPPORT
HEIGHT
1
– Loosen the hexagon socket screw (
A
) with a 3/16 in. Allen wrench.
2
– Place the bracket (
B
) at the desired height and firmly tighten the screw (
A
).
DEPTH
1
– Remove the screw (
C
) and the nut (
D
) with a 4 mm Allen key and an 8 mm open-end wrench.
2
– Move the lower leg support (
E
) into one of the holes of the bracket (B).
3
– Replace and tighten the screw (
C
) and the nut (
D
).
