4 ADJUSTMENTS
Inc. All rights reserved
18
4.1.8. ADJUSTING THE SMALL FLAT PADDED LOWER LEG SUPPORT (14 IN.
BASE)
The lower leg support can be adjusted in height, depth and width (see Figure 4-B).
a) To adjust the height of the lower leg support:
1. Loosen the screw (
A
) with a
5 mm Allen key
;
2. Slide the bracket (
B
) to the desired position;
3. Tighten the screw (
A
) firmly.
Figure 4-B: Adjusting lower leg support height.
b) To adjust the width of the lower leg support (see Figure 4-B):
1. Loosen the screws (
C
) with a
4 mm Allen wrench
;
2. Slide the lower leg support (
D
) to the proper position;
3. Tighten screws (
C
).
c) To adjust the depth of the lower leg support (see Figure 4-B):
1. Remove the screw (
E
) and the stop screw (
F
) with a
5 mm Allen key
;
2. Adjust to the desired position, while leaving a one-hole gap between the two
screws.
3. Tighten the screws, making sure to include the screw washer (
F
).
