63
62
7.7.3 Rear indicator
Spherical bulb:
24V/21W BA 15s
Tool: Phillips screwdriver
☞
Note:
Use a dry cloth to hold the glass body
of the new filament bulb.
7.7.3.1 Removal:
– Switch off the control unit.
– Pull out the security plug and the
main fuse.
– Undo the securing screws and re-
move the lens (Fig. 83).
– Press the defective spherical bulb
(Fig. 83/
➀
) slightly inwards against
the spring, turn it and then pull it
out of the bulb holder.
☞
Note:
The armrest (incl. the lighting unit)
can be detached for a spherical bulb
replacement (see 'Armrest' section).
83
84
1
7.7.3.2 Fitting:
– Insert the new spherical bulb. - Push
the side pins (bayonet catch) into the
recesses of the bulb holder, press
lightly against the spring and then
turn the bulb until the bayonet catch
clicks into place (Fig. 83/
➀
).
– Mount the lens. - Press in the lens
and fasten it with the securing screws
(Fig. 84).
7.7.2.2 Fitting:
– Insert the new spherical bulb. Push
the side pins (bayonet catch) into the
recesses of the bulb holder (Fig. 82,
hold the glass body with a piece of
cloth), press lightly against the spring
and then turn the bulb until the bay-
onet catch clicks into place (Fig. 81).
– Mount the lens. - First insert the top
pins, then press the lens downwards
and screw into place.
82
7.7.2 Front indicator
Spherical bulb:
24V/10W BA 15s
Tool: Phillips screwdriver
☞
Note:
Use a dry cloth to hold the glass body
of the new filament bulb.
7.7.2.1 Removal:
– Switch off the control unit.
– Pull out the security plug and the
main fuse.
– Undo the securing screw and remove
the lens (Fig. 81).
– Press the defective spherical bulb
slightly inwards, turn it and then pull
it out of the bulb holder (Fig. 82).
☞
Note:
The armrest (incl. the lighting unit)
can be detached for a filament bulb
replacement (see
Armrest
section).
81
