52
ABDUCTION WEDGE
The abduction wedge bracket needed
for this can also be assembled on an
afterthought underneath the front
seat surface.
Depth adjustment
Loosen the clamping screws (fig. 68/
➀
) so far that no damage to the coat-
ing occurs during the adjustment.
After loosening the clamping screw
(fig. 68/
➀
) underneath the seat sur-
face adjust the abduction wedge ac-
cording to the personal needs of the
user.
Tighten the clamping screw (fig. 68/
➀
).
!
Attention:
Only pull out the abduction wedge
so far that the abduction wedge
rail for depth adjustment is flush
with the rear end of the abduction
wedge bracket!
Height adjustment
Loosen the clamping screws (fig. 68/
➁
) so far that no damage to the coat-
ing occurs during the adjustment.
68
67
1
2
After loosening the clamping screw
(fig. 68/
➁
) adjust the abduction
wedge to the personal needs of the
user.
Tighten the clamping screw (fig. 68/
➁
).
!
Attention:
Retrofitting is only to be carried out
by an specialist dealer!
