background image

 

Dimensions: 

 

 

 

 

 

 

 

The  manufacturer  warrants  this  LED  underwater  lights  against  defects  in  materials  and 

workmanship for a period of one year from the date of purchase. This warranty does not cover 

the  fixture  becoming  damaged  due  to  misuse,  accidental  damaged,  improper  handling  and/or 

installation  and  specifically  excludes  liability  for  direct,  incidental  or  consequential  damages. 

Defects in materials and workmanship are exclusive of the following: 

• The light has small air bulbs inside the resin on the back side. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

There is no maintenance required for this lamp 

– it is designed to be used only once, meaning 

that replacement is necessary if it becomes defective (repairing is impossible). Before any 

handling, ensure that there is NO voltage supplied to the lamp. To replace, unfasten the lamp 

from the bracket. Ensure the new lamp is of the same model and characteristics as the one 

being replaced. 

 

Start-up 

• The lamp should only operate underwater while secured to the vertical walls of the pool. 

switch on the lamp if it is not underwater.

 

• In case of colored lamps, 16 pre-programmed effects and combinations may be selected using 

Maintenance/Installation

Warranty

Never

PoolStar  Products 

Summary of Contents for SP2526C

Page 1: ...ad these instructions before beginning installation and start up Technical Specification Standard input voltage 12V AC DC Range 12 18VAC or DC Standard input watt RGB White 5W 7W 45 Normal LED Use life 60 000 hours 16 programs with Synchronization capability PoolStar Products Manufacturer O Ryan Industries Inc 12711 NE 95th Street Vancouver Wa 98682 Telephone 1 800 426 4311 1 360 892 0447 Website ...

Page 2: ...esin on the back side There is no maintenance required for this lamp it is designed to be used only once meaning that replacement is necessary if it becomes defective repairing is impossible Before any handling ensure that there is NO voltage supplied to the lamp To replace unfasten the lamp from the bracket Ensure the new lamp is of the same model and characteristics as the one being replaced Sta...

Page 3: ...program when it is turned on again To achieve synchronization confirm all lamps are installed correctly on the same switch after they are powered off for more than 20 seconds switch on and off continuously three times and then finally turn them on again They will all go to program 5 Now you can select a program for them by switch off and on within 8 seconds Alternatively we recommend using our opt...

Page 4: ...l multiple lamps connected to a single junction box The light can be fixed on concrete or stone wall pools thin wall pools fiberglass wall pools metal wall pools or wooden wall pools with liner It can be threaded into the 2 female thread conduit pipe For thin wall pools polyester fiberglass metal or wooden wall pools with liner 4 For concrete or stone wall pools liner and mosaic Thread the light i...

Reviews: