The persons who are in charge of installation should have the required qualifications for this type
of work.
• Avoid making contact with the electric voltage.
• Comply with the current standards regarding accident prevention.
• IEC 364-7-702 standards must be observed: WIRING IN BUILDINGS, SPECIAL WIRING,
SWIMMING POOLS.
• Replacement must be performed with the lamp disconnected from the electric power system.
Packing Contents
The following items are included inside the box:
Lamp Assembly x 1
Plastic Nut x 1
Rubber Ring x 3
Instruction &
This is a high technology electronic controlled light based on LED’s in three colors: red, green
and blue. These three base colors together can produce many other colors to create the perfect
atmosphere in the pool. Any of the 16 pre-programmed effects can be selected with the on/off
switch of your pool lights. The
LED’s can also be warm white only or natural white only. The
10. Riviera: slow animation green/blue
11. White: neutral white
12. Rainbow: slow animation blue/red/green
13. River of colors: program 12, followed by program 15
14. Disco: fast animation
15. Four seasons: slow animation in red/blue/green/violet
16. Party: fast animation
Installation
All lamps should be placed on the wall of the pool below the water surface, in areas that are
easily accessible from the upper edge of the pool.
the on/off switch
of your pool lights. Just switch off and on within 2 seconds.
• If the light is powered off for more than 20 seconds, it will keep the last program when it is
turned on again.
• To achieve synchronization, confirm all lamps are installed correctly on the same switch, after
they are powered off for more than 20 seconds, switch on and off continuously three
times,
and then finally turn them on again. They will all go to program 5. Now you can select a
program for them by switch off and on within 8 seconds.
• Alternatively, we recommend using our optional controller (with built-in safety transformer)
which comes with (a) remote control for easy operation and (b) auxiliary connection of 24V for
operation of any other electrical item.
Safety Warnings
LED’s are driven by constant current.
The technology of True PWM is adopted on the lights.
High temperature protection
causes
the
LED’s to
be protected when the internal temperature
reaches a high level.
All this technology
guarantees
long working life
of the
LED
lamps.
The
lights
must be used / operated while fully submerged underwater
only
.
• This lamp is designed to be fixed in new pools and/or pools with existing surface mounted
lamps that need replacement.
• This lamp is designed to be used only once. Should it become defective, repair is impossible,
and replacement is necessary.
• The manufacturer is not responsible in any circumstances for assembly, installation or start-up
of any electric components which have been inserted or handled at locations other than its
own premises.
16 p
rograms of
RGB colors
1. White: sun white
2. Red: one color red
3. Green: one color green
4. Blue: one color blue
5. Green-blue: fixed color green/blue
6. Red-green: fixed color red/green
7. Blue-red: fixed color blue-red
8. Evening sea: slow animation red/blue
9. Evening
rivers: slow animation red/green
Use
