INSTALLATION
Installation
Step1. How to move the chair
0 Take out the back seat cushion box from the main box first, and then grasp left and right
metal frame, take the chair body from the main carton box.
f} Take out the pillow, back seat cushion, power cord, controller bracket, remote control,
left and right side airbags of seat from back seat cushion box. [As shown th the pictures]
Head pad
Back seat cushion
Electric power cable
Controller bracket
Remote control
Right side airbags
of the seat(zipper
side upwards )
Left side airbags
of the seat(zipper
side upwards )
@)Take out the left, right shoulder and armrest
from the armrest carton box. Catching the
two side of the shoulder and armrest and
take them out slowly. Put the shoulder and
armrest on the table or ground in flat [pay
attention to prevent scratches]. Catch the
shoulder and armrest two sides from the
front of it and take it slowly when install
One hand hold the metal frame
and another hand catch
the backrest, and then take the
chair out of the box.
Massage chair main body
the shoulder and a rm rest.
Left shoulder and armrest Right shoulder and armrest
0 Taking out the leg rest device from the leg rest
carton box.catching the front and back two
sides of the leg rest and take them out.
www.o
s
a
d
ain
d
ia.com
THE ADJUSTMENT BEFORE MASSAGE
How to move massage chair
_&.
Caution
Don't move chair when it's working
to avoid accidents or damage
How to move
•
Bind the cables and put them in the seat
to avoid damage when moving.
•
If you plump the chair, it may damage the
inner parts of the chair.
•
Don't use the castor if the floor is wooden
or other easy damaged material. It will
need 2 or more people to lift the chair.
•
Make sure the power is off and the plug
doesn't touch the floor[lt's better
status to avoid the back
��
to let the chair in standing
(�
crashing the floor]
'(j
Normally
Lift up the leg rest to make the weight
fall on the castor. Then push chair to
destination and set it down.
A
Please hold the footrest to move the
chair as shown in the picture.
Adjustment before massage
Before adjustment
•
Please make sure the
massage head is in the
seat part before sitting
on the chair.
- To avoid injures caused by
wrong position of the massage head.
Acupuncture point tracking
detecting confirm
When acupuncture point position is being
detected, if massage head can't detect the
effective shoulder height position. the
shoulder height position defaults to the
middle part of back.
Right position
Back leaning on the chair
back, the head rests on
the pillow.
The remote control gives
"beep" sound after acupuncture point
tracking detecting finished. if micro
adjustment is needed, just press up/down
key on the remote control.
- If the massage head detecting your
acupuncture point position is not right. you
won't get good massage.
Suggestion
•
When you feel the
intensity isn't strong
enough, take off the
pillow or cushion.
•
Because the chair is
heavy, it may damage
your floor if kept for
long term. Please put
a protector or other
soft support to protect
your floor.