Dimensions and front
OI
22
OI 22 -NTC, PT, J / K / S,
mA, V,
Dimensions and front
DIGITAL INDICATOR 4 digits
1-Set key:
To enter the parameters menu and allows to modify
them.
2-Key:
Decreases the programming value of the parameters.
USER MANUAL
INTRODUCTION:
This manual contains the information necessary for correct
installation and instructions for the use and maintenance of the
product, therefore it is recommended that you carefully read
the following instructions.
The same is said for each person or company involved in the
creation of this manual.
This publication is the exclusive property of OSAKA, which
prohibits its absolute reproduction and disclosure, as well as
part of it, unless expressly authorized.
OSAKA reserves the right to make aesthetic and functional
modifications at any time and without prior notice.
3-Key
: Increases the programming value of the parameters
meters.
Note: The "F" key is displayed neutral because it does not have any
function.
2 - TECHNICAL DATA
ELECTRICAL CHARACTERISTICS
Feeding: 230 VAC +/- 10%. AC
frequency: 50/60 Hz. Consumption: 3
VA approx.
Tickets: 1 input for NTC, PT100 and J / K / S type probes and 0 /
4..20mA and 0..10V signal.
Protection class against electric shock: Class III. Isolation: no
isolation between supply and input.
INDEX
3
4
5
6
7
8
1
GENERAL DESCRIPTION
2
TECHNICAL DATA
INSTALLATION
PARAMETER PROGRAMMING (OI 22 mA, V)
PARAMETER TABLE (OI 22 mA, V)
DESCRIPTION OF THE PARAMETERS (OI 22 mA, V)
TROUBLESHOOTING, MAINTENANCE AND WARRANTY
HOW TO CHANGE THE DECIMAL POINT IN THE OI 12 NTC,
PT100, J / K / S, mA and V
MECHANICAL CHARACTERISTICS
Case: Self-
extinguishing plastic UL 94 V0. Dimensions: 33
x 75 mm, depth 64 mm. Weight : 180 g approx.
Installation: Recessed in 29 x 71 mm gap panel.
Connections: Terminal strip for 2.5 mm cable
two
Frontal protection degree: IP 65.
Ambient operating temperature: 0 ... 55 ° C. Operating ambient
humidity: 30 ... 95 RH% non-condensing.
Transport and storage temperature: -10 ... +60 ° C.
1 - GENERAL DESCRIPTION
The OI 22 model is a digital indicator equipped with 1 input for
NTC, PT100, J / K / S type probes, and mA and V signals. The
process value is displayed on a 4-digit red display.
The front of
the OI 22 mA or V has keys that are used to configure and
modify the range
.
FUNCTIONAL FEATURES
Measurement range: depending on the probe used: NTC = -50..100
ºC; PT100 = -200..850 ° C; J = 0..1000 ° C; K = 0..1370 ° C; S = 0..1760 °
C; 0 / 4..mA, 0..10V.
Display resolution: 1 / 0.1 / 0.01 / 0.001.
Total precision: +/- 0.5% fs. Sampling
frequency: 130 ms.
Accordance: EEC EMC Directive 89/336 (EN 50081-1, EN
50082-1), EEC Directive BT 73/23 and 93/68 (Device that
operates with a nominal voltage lower than 50 VAC and 75 VDC).
OSAKA
- OI 22-NTC, PT, JKS, mA, V - USER MANUAL - v2.0K - PAG.
1
