Quick reference guide PRO 08D
Page 2 / 13
1.
WARNING
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE, REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
WARNING:
2VDND6ROXWLRQV6/
can accept no responsibility for any possible damage due
WKHXVDJH
of not supported modems.
2VDND6ROXWLRQV6/
reserves itself the right to modify this manual without
QRWLFH
WARNING:
This quick reference guide is part of the product and should be kept near the
instrument to easy and quick reference. The instrument shall not be used for
different purpose from those described in this manual. It cannot be used as a
safety device. Check the application limits before proceeding.
WARNING:
Check the supply voltage is correct before connecting the instrument.
Do not expose to water or moisture: use the controller only within the operating
limits avoiding sudden temperature changes with high atmospheric humidity to
prevent formation of condensation.
Warning: disconnect all electrical connections before any kind of maintenance.
Fit the probe where it is not accessible by the End User.
The instrument must not be opened.
Consider the maximum current which can be applied to each relay (see
Technical Data).
Ensure that the wires for the probes, loads and the power supply are separated
and far enough from each other, without crossing or intertwining.
In case of applications in industrial environments, the use of mains filters (our
mod. FT1) in parallel with inductive loads could be useful.
OSAKA
reserves the right to modify or change its products without prior warning.
