background image

EC MACHINERY DIRECTIVE 89/37/EC

EC LOW-VOLTAGE EQUIPMENT DIRECTIVE 73/23 EEC

EC ELECTROMAGNETIC COMPATIBILITY DIRECTIVE 89/336 EEC

DECLARATION OF CONFORMITY

We hereby certify that OSAKI GTF250  Trimmer

complies with all the relevant provisions of the

EC Directives 98/37/EC, 73/23 EEC, 89/336 EEC 

Harmonised Standards Applied: EN60335-1:1994, EN55014-2:1997

EN 61000-3-2:2000, EN61000-3-3:1995, EN55014-1:2000, IEC 60335-2-91

Offi cial Agent

KENNEDY TOOLS

Wigston Works, Leicester, England.

ISO 9001 REGISTERED COMPANY

Signed:

Date: 1st Jan 2006    Name: Martin Cooke    Position: Director, The Kennedy Group Ltd.

QUALITY GUARANTEE & WARRANTY

OSAKI LAWN & GARDEN TOOLS carry one years manufacturers warranty.

OSAKI LAWN & GARDEN TOOLS are designed & produced

to the highest standards & specifi cations

OSAKI LAWN & GARDEN TOOLS are fully guaranteed against

faulty materials & workmanship

Should they be found to be defective, they will either be repaired or replaced

free of charge (fair wear and tear and/or misuse excepted).

 This does not affect your legal rights.

Please retain supplier invoice as proof of purchase.

AVAILABLE FROM YOUR DISTRIBUTOR

Osaki continually strives to improve it products, specifi cations may change without prior notice.

© The Kennedy Group Ltd. 01/06 

Summary of Contents for GTF250











Reviews: