background image

• Always be sure of your footing.

Particularly on slopes.

.

• Exercise extreme caution when changing direction 

on slopes.

.

• Do not cut excessively steep slopes and always

wear non-slip footwear.

• Walk, never run.

.

• Ensure the lines have stopped rotating and

take extreme care before lifting your trimmer for 

and during transportation.

.

• Never operate your trimmer with defective

guards or shields.

ELECTRICAL SAFETY

Always  check  that  power  supply 

corresponds to the voltage rating plate.

DOUBLE INSULATION

Your electric tool is double insulated.

This means that all external metal parts 

are electrically isolated from the power 

supply.  This is achieved by placing an 

extra  insulation  barrier  between  the 

electrical and mechanical parts.  Double 

insulation means greater electrical safety 

and there is no need to have your 

electrical tool earthed.

• Your trimmer will continue to run for a

short time after releasing the switch lever.  Always 

allow your trimmer to stop on its own.

.

• Release the switch to turn your trimmer off

and remove the plug from the mains:

.

- Whenever you leave your trimmer unattended.

.

- Before checking, cleaning, adjusting or

working on your trimmer.

.

- If your trimmer starts to vibrate abnormally

(check immediately).

.

- After striking a foreign object.  Inspect your

trimmer for damage and make repairs

as necessary.

.

• Do not put hands or feet near rotating parts.

.

• Do not use your trimmer in the rain and do

not allow it to get wet. Avoid using your grass 

trimmer in wet grass, if possible.

.

• Use your grass trimmer only in daylight or

good artificial light. 

• Do not walk backwards when operating.

SAFETY

THE NUMBERS MENTIONED IN THE TEXT CORRESPOND WITH THE PICTURES

TECHNICAL DRAWINGS

• Your grass trimmer is designed for use on AC

(mains) electrical supplies only, do not attempt to 

use it on any other supply.

• Never carry your grass trimmer by the cable or

jerk the cable to separate the connectors.

• Keep the cable away from heat sources, oils or

sharp edges. Check the condition of your cable 

before use and do not use if damaged.

PREPARATION

• To protect your feet, always wear stout shoes

or boots-freshly cut grass is damp and slippery.

• Rubber or man-made footwear will

enhance your safety.

• Do not operate the grass trimmer barefoot or

in open sandals.

• Use protective equipment. Wear safety spectacles

or goggles whilst operating your grass trimmer. 

Use ear protection if the sound level seems uncom-

fortable when using your trimmer.

• Use a face mask if the ground is dusty.

• Wear long trousers to protect your legs.

WARNING

Read this manual carefully before using the machine, 

for your own safety.

SAFETY INSTRUCTIONS

When using the machine, always observe the enclosed 

safety instructions as well as the additional safety 

instructions.

Read all of this manual carefully, observing the recom-

mended safety instructions before, during and after 

using your electric tool. Following these simple instruc-

tions will also maintain your electric tool in good 

working order. Familiarise yourself with the controls 

on your electric tool before attempting to operate it, 

but above all, be sure you know how to stop your 

electric tool in an emergency. Retain this user manual 

and all other literature supplied with your electric tool 

for future reference.

SAFETY INSTRUCTIONS

TRAINING

• Never allow children or persons who are

unfamiliar with this type of electric tool to use it,

nor anyone who has not read this user manual.

.

• Do not allow children, animals or other persons

near your electric tool when in use, always keep 

them at least 6m (20ft) away from the cutting area.

.

• Remember that the operator is responsible

for accidents or hazard occurring to other people 

or their property.

INTRODUCTION

INTRODUCTION

Summary of Contents for GTF250











Reviews: