background image

POSSIBLE CAUSE

No Fuel.

No ignition.

Air filter blocked.

Always adhere to the processes and safety

warnings, which are stated in the instruction

manuals of tools/appliances which are used in

conjunction with your generator.

RISK OF POISONING

EXHAUST FUMES CONTAIN CARBON 

MONOXIDE (CO) GAS WHICH CAN KILL.

YOU CANNOT SEE IT OR SMELL IT

Always use outdoors in a well ventilated area

away from doors, windows and vents. 

Always keep children, pets and others away

from the area the Generator is operating in.

RISK OF ELECTROCUTION

Always earth the Generator.

Always keep dry. Do not use in rain, snow or

near water.

Always place the Generator on a non conductive

surface.

Never touch with wet hands.

Never connect to any commercial power outlet.

N e v e r   c o n n e c t   i n   p a r a l l e l   w i t h   a n y   o t h e r

Generator.

RISK OF FIRE

Always equip the area of operation with a

suitable fire extinguisher.

Always switch off the Generator and let it cool

down before refuelling.

Always be careful not to spill any fuel. Wipe up

spilled fuel immediately.

Always make sure the fuel cap is replaced

securely.

Never refuel while smoking or in the vicinity of a

naked flame.

Never place flammable materials near the

Generator.

Never operate in hazardous locations where

there is a risk of explosion of petrol fumes,

leaking gas or explosive dust.

SYMBOLS USED ON THE AIR COMPRESSOR

Read the

Warning

Do not use

Hot

Risk of

Risk of

Earth/Grounding

Operator’s Manual

Indoors

Components

Fire

Shock Hazard

Point

SAFETY INSTRUCTIONS

OTHER OSAKI PRODUCTS

2

Osaki Power Tools are committed to the Production of Quality Power Tools 

that are designed for high performance and long service life. 

If safety and maintenance procedures are observed they will last for many years.

Man, Earth and the Universe 

are forces that create an 

immovable centre of balance . . .

the 

balance of power

SOLUTION

Check the Fuel tank for fuel.
Check the Fuel tap is on.

Check that the engine switch is “ON”.
Check the spark plug for a spark. Clean or 
replace if neccessary.

Clean or replace if neccessary.

Consult your local dealer

FAULT

Engine won’t start.

Engine still won’t start.

Repairs must be performed in a dirt-free environment by a qualified person who is familiar
with this type of equipment.

TROUBLESHOOTING

7

OSA2733000K_Instructions.qxd  07/06/2010  13:08  Page 2

Reviews: