OPERATOR’S MANUAL
Bench mounting Pillar Drill
PDB132
Suitable for DIY, not industrial use
Smooth running 350W motor for drilling
holes up to 13mm
5 speeds for versatility and performance
when drilling different materials
Tilting rise and fall work table
Operates from a standard 13amp plug
AVAILABLE FROM YOUR DISTRIBUTOR
EC DECLARATION OF CONFORMITY
Osaki Power Tools continually strives to improve its products. Specifications may change without prior notice.
OSAKI TOOLS Official Agents -
JAPAN: MIKI TOOL TRADING CO. MIKI CITY, JAPAN.
EUROPE, MIDDLE EAST, AMERICA & AFRICA: KENNEDY TOOLS, WIGSTON, ENGLAND, LE18 2FS
DECLARATION OF CONFORMITY
We hereby certify that OSAKI PDB132 Bench Pillar Drill
complies with all the relevant provisions of the following directives:
Electromagnetic Compatibility 2004/108/EC, Low Voltage 2006/95/EC and Machinery 2006/42/EC.
Standards applied: EN 61029-1/A12:2003, EN 55014-1/A2:2002, EN 55014-2/A1:2001,
EN 61000-3-2/A2:2005, EN 61000-3-3/A2:2005.
Official Agent
KENNEDY TOOLS
Wigston, Leicester, England, LE18 2FS.
Supplied by an ISO9001 approved company
Signed:
Date:
February 2013
Name:
Keith Read
Position:
Group HSQE Manager
QUALITY GUARANTEE & WARRANTY
OSAKI POWER TOOLS carry one years manufacturers warranty.
OSAKI POWER TOOLS are designed & produced
to the highest standards & specifications
OSAKI POWER TOOLS are fully guaranteed against
faulty materials & workmanship
Should they be found to be defective, they will either be repaired or replaced
free of charge (fair wear and tear and/or misuse excepted).
This does not affect your legal rights.
Please retain supplier invoice as proof of purchase.
Osaki Power Tools are designed for DIY and hobby use only.
They are not covered by an industrial warranty. Industrial use will invalidate this guarantee.
Osaki, Osaki Xtra-plus and the round Mitsudomoe logo are trade marks of Osaki Tools.
ORDER CODE
OSA-279-9340K
© The Kennedy Group Ltd. 03/13
Supplied by an ISO9001 approved company
