background image

·

Click the “        ” icon to adjust the massage time function. Each time you press it, 
it will add 5 minutes. It cannot exceed 40 minutes. If it exceeds 40 minutes, it will 
return to 5 minutes.

·

Click the “

   

 ” icon to switch on or off Blue tooth. “

    

” is to switch off the Blue 

tooth status, and “

    

” is to switch on the Blue tooth status.

·

After the Blue tooth-enabled audio source device (such as mobile phone, MID 
tablet, etc.) is paired with the massage chair Blue tooth module, the music played 
by the audio source device can be wirelessly transmitted to the massage chair 
audio system for music playback via Blue tooth.

9

)

Bluetooth

10

)

Timeadjustment

16m

in

Method of usage

Method of usage

Blue tooth switch 

Blue tooth 
off state

Blue tooth 
on state

Blue tooth interface not enabled

Attentions:  When  controlling  the  Blue  tooth  switch,  you  should  return  to  the  main 
information control interface. If you are in the manual, angle adjustment or custom 
storage control interface, Blue tooth can't be controlled.

Time Setting

Time adjustment interface

Attentions:  When  adjusting  the  time,  you  should  return  to  the  main  information 
control interface. If you are in manual, angle adjustment or custom storage control 
interface, the time cannot be controlled.

11

)

Handrailshortcutbutton

Function

Description 

Power button: Short press this button to pause the operation, long 
press for 3 seconds to open the key. Pause for more than 20 minutes 
during the massage will automatically turn off all massage functions.

O2 Ionizer: Press this switch on or off the negative oxygen ions function.

Back  rest  &  calf  unit  linked  up

Press  and  hold  to  raise  both  the 

backrest and calf unit at the same time, release to stop. After the back 
rest & calf unit linked up is completed, the calf sensor will automatically 
detect the length of the foot.

Back  rest  &  calf  unit  linked  down

Press  and  hold  to  lower  both  the 

backrest and calf unit at the same time, release to stop. After the back 
rest  &  calf  unit  linked  down  is  completed,  the  calf  sensor  will 
automatically detect the length of the foot.

Zero  gravity  button:  Each  time  the  button  is  pressed,  the  position  of 
the calf frame and the back frame is automatically adjusted to the zero 
gravity  position.  There  are  two  zero  gravity  modes,  and  the  cycle  is 
switched.

Up  button:  Press  and  hold  to  manually  adjust  the  foot  massage 
assembly to slowly shorten, release to stop.

Lower  button:  Press  and  hold  to  manually  adjust  the  foot  massage 
assembly to slowly extend, release to stop.

Up  button:  Press  and  hold  to  manually  raise  the  calf  massage 
assembly to the knee position, release to stop.

Lower  button:  Press  and  hold  to  manually  lower  the  calf  massage 
assembly to the calf position, release to stop.

Automatic mode button: each press, automatic massage function 
switch.

USB jack: a USB charging port that can charge smart devices (such 
as mobile phones).

25

24

Manual

Customise

Angle

Setting

2

06

Upper Air 

Lower Air

Stress Relieving

Energy

Good-night Sleep

Joint Care

Frozen Shoulder

Spine Massage

Thai Massage

More

Manual

Customise

Angle

Setting

2

06

Upper Air 

Lower Air

Stress Relieving

Energy

Good-night Sleep

Joint Care

Frozen Shoulder

Spine Massage

Thai Massage

More

16min

Waist Care

16min

Waist Care

16min

Waist Care

16min

Waist Care

16min

Waist Care

Summary of Contents for First Class LE



















Reviews: