16
1
2
3
4
FUSE:
T5AL 250V
POWER INPUT
CONTROLLER JACK
ON/OFF
17
1.
2. Place the calf fixing block on the two sides of the round tubes of the calf (Figure 2).
3. Hang the calf of the fixed block on the massage chair frame hook (Figure 3).
4.Then use 4 (each side two pcs) M4 screws to fasten the calf to the massage chair,
check whether there is any abnormality, whether the pipeline is folded or not, and
finish the installation (Figure 4).
Method of usage
Method of usage
3.T
urn off the power and stop massage.
·
When pressing the power button during the massage, it will stop all the massage
functions immediately, the backrest and footrest will go back to the default posit
on.
And when the massage time
s
up, the massage hand will go back to the
default
position, all the massage function will stop, the backrest and footrest will
not go
back to the default position.
·
Cut off the power of the whole machine. Figure (switch power off)
Diagram of the power switch position
Unplug the power cord
4.The calf installation.
After connecting the air hose and the wire harness on the calf and the massage
chair, untie the fixed line belt and insert the connecting part into the frame (Figure
1).
·
Air pressure massage
·
Foot roller manual massage function
·
Pause/start massage button
·
Backrest and calf position adjust
·
Other manual functions
min
Function
Button
Description
Display
Air
pressure
mode
Intensity
Full air pressure: air pressure massage on arm,
leg and foot.
Arm: Air pressure massage focus on arm.
Legs: Air pressure massage focus on leg and foot.
3 levels adjustable
Function
Button
Description
Display
Foot roller
Roller
intensity
The foot roller massage function turn on or off.
After the foot roller massage is turned on, the
massage intensity can be adjusted: mild, medium
and strong.
Function
Button
Description
Display
Pause/
Start
Press this button during the massage, all massage
actions are stop
ped
immediately (the timer will
continue to count down), and press this button
again, all the massage will be resume.
Function
Button
Description
Lifting
button
Lying
button
Automatic
lying mode
Press and hold this button, it will raise the backrest and lower
the footrest simultaneously, a "Di.Di
"
sound indicate
s
that it
has reach the maximum position and stop
s
. Press this button
again while lifting, then immediately stop.
Press and hold this button, it will lower the backrest and raise
the footrest simultaneously, a "Di.Di
"
sound indicate
s
that it
has reach the maximum position and stop. Press this button
again while lifting, then immediately stop.
When pressing this button, it will automatically place you into
one position, total three position switch.
Function
Button
Description
Display
Timing
Timing
Timing adjustment, press one time, add 5
minutes, not more than 30 minutes. If it
exceeds 30 minutes, it will return to 5 minutes.
