background image

31

30

Method of Usage

Method of Usage

Note:

·

According to the remaining massage time, when the displayed time is not enough 
for the addition and subtraction of a certain time, the operation will not be 
displayed (the upper limit of the time display is 40 minutes). For example: If the 
display time of the remote controller is 39 minutes, the massage time adjustment 
range will be: -5min, -10min (+10min or +5min cannot be displayed).

·

The adjustment of airbag intensity can only be used when the airbag function or 
the automatic function is enabled (for more information about how to enable the 
airbag function, refer to Page 18 of the Operation Instructions).

5

.

Zero-gravity key

·

Press "Zero-gravity Key" to adjust the position of zero gravity. You can choose 
different angle positions for zero gravity according to your own needs (i.e. 1st 
pressing is Level 1; 2nd pressing is Level 2; 3rd pressing is Level 3; and 4th 
pressing makes the massage chair restore to the original state).

Button

Description

Zero-gravity Key: Once it is pressed, the positions of the leg rest and 
the backrest can be automatically adjusted to the positions for zero 
gravity.There are three zero-gravity modes and the lying OFF mode, 
which can be switched.

6

.

Lying angle adjustment button

Button

Description

Leg rest up button: Hold down the button to make the leg rest rise 
slowly. Release it to stop such action.

Leg rest down button: Hold down the button to make the leg rest 
move downward slowly. Release it to stop such action.

Calf rest shorten button: Hold down the button to make the calfrest 
short slowly, release to stop.

Calf rest extend button:  Hold down the button to make the calfrest 
extend slowly, release to stop.

Linkage sitting key: By holding down this key, the backrest will rise 
slowly and the leg rest will move downward slowly; by releasing it, 
such UP/DOWN action of the backrest and the leg rest will be 
stopped.

Linkage lying key: By holding down this key, the backrest will move 
downward slowly and the leg rest will rise slowly; by releasing it, such
DOWN/UP action of the backrest and the Leg rest will be stopped.

Summary of Contents for Otamic Pro-3D Signature























Reviews: