- 24 -
EN
3) Group 2/3 (forward-facing)
(For children weighing 15–36 kg)
INFORMATION:
FIRST, REMOVE THE BELT SYSTEM AS PREVIOUSLY DESCRIBED. THE SUPPORT LEG MUST BE
RETRACTED AND MUST NOT TOUCH THE CAR FOOTWELL. THE SUPPORT LEG INDICATOR
MUST THEREFORE SHOW RED.
1.
Follow the installation steps 1 to 4 in Point 2 (Group 1, forward-facing).
2.
Now thread the diagonal belt through the car’s 3-point belt guide on the head support of
the child car seat.
3. When placing your child in the child car seat, turn the car seat towards the car door for
convenience.
4. Put your child in the child car seat.
5.
Adjust the height of the head support so that the child’s head is completely positioned in
the head support and the diagonal belt exits the belt guide at the child’s shoulder height.
6. Turn the seat into the forward-facing position. Check whether the child car seat is locked in
this position.
7.
Close the belt buckle of the car’s 3-point belt again until you hear a click.
8. Pull the diagonal strap in order to tighten it. Please ensure that the straps are not twisted.
9. The child car seat may only be used in seat position 5 for this age group.
Installation without Isofix:
Alternatively, the child car seat can also be installed with just the 3-point belt in group 2/3.
Connecting the seat with the Isofix connectors is not absolutely essential but is recommended.
