LMW-230 SERIES LCD MONITOR User Manual
- 7 -
The specifications of terminals
are as follows
：
SDI IN1: SDI 1 Input Terminal
SD-SDI input signal which is in compliance with SMPTE259M and ITU-R BT656 standard.
SDI IN2: SDI 2 Input Terminal
SD-SDI input signal which is in compliance with SMPTE259M and ITU-R BT656 standard.
SDI OUT: SDI Output Terminal
Output terminal for
selected SDI signal.
LINE1(VIDEO) : LINE 1 Input Terminal
Analog Composite Video Signal only.
LINE2 (VIDEO/Y): LINE 2 Input Terminal
Analog Composite Video input signal, or luminance (Y) signal of Y/C or YPbPr.
LINE2 (C/Pb): LINE 2 Input Terminal
Chroma (C) signal of Y/C or Pb(Blue) component of YPbPr .
LINE2 (Pr): LINE 2 Input Terminal
Pr (Red) component of YPbPr .
DVI-I (DVI-D/VGA/HDMI): DVI-I Input Terminal
DVI analog/digital. Requires adapter for VGA signals. Supports HDMI input signal.
AUDIO IN1: Analog Audio (IN1) Terminal
Input terminal for the analog audio signal.
L:
left audio channel;
R:
right audio channel.
AUDIO IN2: Analog Audio (IN2) Terminal
Input terminal for the analog audio signal.
L:
left audio channel;
R:
right audio channel.
AUDIO OUT: Analog Audio (OUT) Terminal
Outputs the audio signal which is selected by the input select button on the front panel.
L:
left audio channel;
R:
right audio channel.
GPI
：
GPI Terminal
