SECTION 3 - MACHINE CONTROLS AND INDICATORS
3121606
– JLG Lift –
3-15
NOTE:
When boom is positioned above horizontal and any of the fol-
lowing switches, DRIVE SPEED/TORQUE SELECT or FUNCTION
SPEED, are positioned to HIGH, high function speeds are auto-
matically cut out and the machine continues to operate at a
lower speed.
NOTE:
The drive/steer control joystick can only command counter-
rotate by being moved in the joystick's left - to - right axis, after
first achieving the joystick neutral position.
DO NOT OPERATE MACHINE IF DRIVE SPEED /TORQUE SELECT OR FUNCTION SPEED
SWITCHES OPERATE WHEN BOOM IS ABOVE HORIZONTAL.
9.
Telescope
Provides extension and retraction of the main
boom.
10.
Lights (If Equipped)
This switch operates accessory light packages
if the machine is so equipped.
11.
Jib (If Equipped)
Push forward to lift up, pull back to lift down.
Variable lift speed is using the Function Speed
Control.
12.
Platform Rotate
Provides rotation of the platform when posi-
tioned to the right or left.
13.
Soft Touch/SkyGuard Override Switch (If equipped)
The machine can be equipped with one of three options. It
may have Soft Touch, SkyGuard, or both Soft Touch and Sky-
Guard.
If equipped with Soft Touch, the switch
enables the functions that were cut out
by the Soft Touch system to operate
again at creep speed, allowing the
operator to move the platform away from the obstacle that
caused the shutdown situation.
If equipped with SkyGuard, the switch
enables functions cut out by the Sky-
guard system to be operated again,
allowing the operator to resume use of
machine functions.
To
order go
to
Discount-Equipment.com
