SECTION 3 - MACHINE CONTROLS AND INDICATORS
3121606
– JLG Lift –
3-17
Platform Control Indicator Panel
(See Figure 3-7., Platform Control Indicator Panel)
1.
Tilt Alarm Warning Light and Alarm
Indicates that the chassis is on a slope. An
alarm will also sound when the chassis is on a
slope and the boom is above horizontal. If lit
when boom is raised or extended, retract and lower to
below horizontal then reposition machine so that it is level
before continuing operation. If the boom is above horizontal
and the machine is on a slope, the tilt alarm warning light
will illuminate and an alarm will sound and CREEP is auto-
matically activated.
IF TILT WARNING LIGHT IS ILLUMINATED WHEN BOOM IS RAISED OR EXTENDED,
RETRACT AND LOWER TO BELOW HORIZONTAL THEN REPOSITION MACHINE SO THAT
IT IS LEVEL BEFORE EXTENDING BOOM OR RAISING BOOM ABOVE HORIZONTAL.
2.
Platform Overload Indicator (If Equipped)
Indicates the platform has been overloaded.
3.
Capacity Indicator
Indicates the maximum platform capacity for
the current position of the platform.
Restricted capacities are permitted at
restricted platform positions (shorter boom
lengths and higher boom angles).
NOTE:
Refer to the capacity decals on the machine for
restricted and unrestricted platform capacities.
4.
Drive Disabled Indicator
When illuminated, the drive function has been
disabled. (Refer to Drive Function Operating
Range Diagrams in Section 2).
To
order
go
to
Discount-Equipment.com
