SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
3121606
– JLG Lift –
2-3
Table 2-1.Inspection and Maintenance Table
Type
Frequency
Primary
Responsibility
Service
Qualification
Reference
Pre-Start Inspection
Before using each day; or
whenever there’s an Operator change.
User or Operator
User or Operator
Operator and Safety Manual
Pre-Delivery Inspection (See
Note)
Before each sale, lease, or rental delivery.
Owner, Dealer, or User
Qualified JLG Mechanic
Service and Maintenance Manual
and applicable JLG inspection form
Frequent Inspection
(See Note)
In service for 3 months or 150 hours, whichever comes first;
or
Out of service for a period of more than 3 months;
or
Purchased used.
Owner, Dealer, or User
Qualified JLG Mechanic
Service and Maintenance Manual
and applicable JLG inspection form
Annual Machine Inspection
(See Note)
Annually, no later than 13 months from the date of prior
inspection.
Owner, Dealer, or User
Factory Trained
Service Technician
(Recommended)
Service and Maintenance Manual
and applicable JLG inspection form
Preventative Maintenance
At intervals as specified in the Service and Maintenance
Manual.
Owner, Dealer, or User
Qualified JLG Mechanic
Service and Maintenance Manual
NOTE:
Inspection forms are available from JLG. Use the Service and Maintenance Manual to perform inspections.
To
order
go
to
Discount-Equipment.com
