SECTION 3 - MACHINE CONTROLS, INDICATORS, AND OPERATION
3-24
31217156
3.12 PARKING AND STOWING
Park and stow the machine as follows:
1.
Drive the machine to a reasonably well-protected and well-
ventilated area.
2.
Ensure the platform is fully lowered.
3.
Position the emergency stop switch to the off position.
4.
If necessary, cover the instruction placards, caution and
warning decals so that they will be protected from hostile
environment.
5.
Chock at least two wheels when parking the machine for an
extended period of time.
6.
Turn the platform/off/ground control select switch to off and
remove the key to disable the machine and prevent unau
-
thorized use.
3.13 TIE DOWN/LIFT LUGS
Tie Down
When transporting the machine, the platform extensions must be fully
retracted and the platform fully lowered in the stowed position with
the machine securely tied down to the truck or trailer deck. Refer to the
four tie down/lift lugs eyes. Reference Figure 3-5., Lifting and Tie Down
Lifting
If it becomes necessary to lift the machine, it is possible to do so from
the tie down/lift lugs. These lugs enable the machine to be lifted using
cranes or other suitable lifting devices.
NOTE:
If lifting becomes necessary from the lifting lugs, JLG Industries
Inc. recommends the use of a proper spreader bar to avoid dam
-
age to the machine. Cranes or other lifting devices must be capa
-
ble of handling the weights listed in Section 6.
3.14 TOWING
It is not recommended that this machine be towed, except in the event
of an emergency such as a machine malfunction or a total machine
power failure. Refer to Section 4 for emergency towing procedures.
To
order go
to
Discount-Equipment.com
