SECTION 4 - EMERGENCY PROCEDURES
4-2
31217156
4.4
EMERGENCY CONTROLS AND LOCATIONS
Emergency Stop Switch
These large red buttons, one located at the Ground Control Station
and one at the Platform Control Station, will immediately stop the
machine when depressed.
CHECK MACHINE DAILY TO MAKE SURE EMERGENCY STOP BUTTON IS IN PLACE AND
THAT GROUND CONTROL INSTRUCTIONS ARE IN PLACE AND LEGIBLE.
Ground Control Station
The Ground Control Station is located on the left side of the
machine frame. The controls on this panel provide the means for
overriding the platform controls and for controlling the platform
lift up and down functions from the ground. Place the power select
switch in the ground position and operate the lift switch to lift up
or down.
4.5
EMERGENCY OPERATION
Use of Ground Controls
NOTICE
KNOW HOW TO USE THE GROUND CONTROLS IN AN EMERGENCY SITUATION.
Ground personnel must be thoroughly familiar with the machine
operating characteristics and the ground control functions. Train
-
ing should include operation of the machine, review and under
-
standing of this section and hands-on operation of the controls in
simulated emergencies.
Operator Unable to Control Machine
1.
Operate the machine from ground controls ONLY with the
assistance of other personnel and equipment (cranes, overhead
hoists, etc.) as may be required to safely remove the danger or
emergency condition.
2.
Other qualified personnel on the platform may use the plat
-
form controls. DO NOT CONTINUE OPERATION IF CONTROLS
DO NOT FUNCTION NORMALLY.
3.
Cranes, forklift trucks or other equipment which may be avail
-
able are to be used to remove platform occupants and stabilize
motion of the machine in case machine controls are inade
-
quate or malfunction when used.
To
order go
to
Discount-Equipment.com
