SECTION 5 - EMERGENCY PROCEDURES
5-2
– JLG Lift –
3121132
5.3 EMERGENCY CONTROLS AND THEIR
LOCATIONS
Emergency Stop Switch
These large red buttons, one located at the Ground Control
Station and one at the Platform Control Station, will immedi-
ately stop the machine when depressed.
CHECK MACHINE DAILY TO MAKE SURE EMERGENCY STOP BUTTON
IS IN PLACE AND THAT GROUND CONTROL INSTRUCTIONS ARE IN
PLACE AND LEGIBLE.
Ground Control Station
The Ground Control Station is located on the left side of the
machine frame. The controls on this panel provide the
means for overriding the platform controls and for controlling
the platform lift up and down functions from the ground.
Place the power select switch in the ground position and
operate the lift switch to lift up or down.
Manual Descent
The manual descent valve is used, in the event of total power
failure, to lower the platform using gravity. The manual
descent handle is located on the front of the machine frame.
The handle is connected, by a cable, to the manual descent
valve on the lift cylinder. Pulling the manual descent ring
opens the valve spool, lowering the platform.
