SECTION 6 - JLG CONTROL SYSTEM
3121659
– JLG Lift –
6-41
LIFT/SWING LOCKED - JOY-
STICK MOVED BEFORE FOOT-
SWITCH
2221
Machine is in Platform Mode;
The UGM detects one of the following conditions:
Lift and/or Swing joystick is not in the neutral position at
Startup;
Lift and/or Swing joystick is not in the neutral position when
Footswitch becomes active or while DTC 2212, 2213 or 2223 is
active
If triggered by the Lift and/or
Swing joystick not being in
the neutral position at
Startup, the UGM shall pro-
hibit Lift and Swing.
If triggered by Lift and/or
Swing joystick is not in the
neutral position when Foot-
switch becomes active or
while DTC 2212, 2213 or 2223
is active, the UGM shall not
Enable the Machine
If triggered by the Lift and/or Swing joystick
not being in the neutral position at Startup,
then (Lift and/or Swing joystick is returned
to its neutral position) and (Lift and Swing
permitted after controls initialized)
If triggered by the Lift and/or Swing joystick
is not in the neutral position when Foot-
switch becomes active or while DTC 2212,
2213 or 2223 is active, then controls initial-
ized
WAITING FOR FSW TO BE OPEN
2222
Machine is in Platform Mode;
Footswitch is active at Start Up
The UGM shall not Enable the
Machine
Controls initialized
FUNCTION SWITCHES LOCKED -
SELECTED BEFORE ENABLE
2223
Machine is in Platform Mode;
Any of the following Platform inputs are active when Foot-
switch becomes active or while DTC 2212, 2213 or 2221 is
active:
Tower Lift;
Telescope;
Platform Level;
Platform Rotate;
Jib Lift (if MACHINE SETUP > JIB = YES)
The UGM shall not Enable the
Machine
Controls initialized
FOOTSWITCH SELECTED
BEFORE START
2224
Machine is in Platform Mode;
The engine is stopped;
Startup time has expired;
The Footswitch is active before the Platform Engine Start
switch input = High
The UGM shall prohibit
Engine Start
The Platform Engine Start switch input =
Low;
FUNCTION PROBLEM - PLAT-
FORM ROTATE LEFT PERMA-
NENTLY SELECTED
2247
Machine is in Platform Mode;
The Platform Rotate Left switch input = High at Startup
The UGM shall prohibit Plat-
form Rotate Left and Right
The Platform Rotate Left switch input =
Low;
Platform Rotate Left and Right permitted
after controls are initialized
FUNCTION PROBLEM - PLAT-
FORM ROTATE RIGHT PERMA-
NENTLY SELECTED
2248
Machine is in Platform Mode;
The Platform Rotate Right switch input = High at Startup
The UGM shall prohibit Plat-
form Rotate Left and Right
The Platform Rotate Right switch input =
Low;
Platform Rotate Left and Right permitted
after controls are initialized
FUNCTION PROBLEM - JIB LIFT
UP PERMANENTLY SELECTED
2249
Machine is in Platform Mode;
MACHINE SETUP > JIB = YES;
The Jib Lift Up switch input = High at Startup
The UGM shall prohibit Jib Lift
Up and Down
The Jib Lift Up switch input = Low;
Jib Lift Up and Down permitted after con-
trols are initialized
FUNCTION PROBLEM - JIB LIFT
DOWN PERMANENTLY
SELECTED
2250
Machine is in Platform Mode;
MACHINE SETUP > JIB = YES;
The Jib Lift Down switch input = High at Startup
The UGM shall prohibit Jib Lift
Up and Down
The Jib Lift Down switch input = Low;
Jib Lift Up and Down permitted after con-
trols are initialized
FUNCTION PROBLEM - TELE-
SCOPE IN PERMANENTLY
SELECTED
2251
Machine is in Platform Mode;
The Telescope In switch input = High at Startup
The UGM shall prohibit Tele-
scope In and Out
The Telescope In switch input = Low;
Telescope permitted after controls are ini-
tialized
FUNCTION PROBLEM - TELE-
SCOPE OUT PERMANENTLY
SELECTED
2252
Machine is in Platform Mode;
The Telescope Out switch input = High at Startup
The UGM shall prohibit Tele-
scope In and Out
The Telescope Out switch input = Low;
Telescope permitted after controls are ini-
tialized
Table 6-5. Diagnostic Trouble Code Chart
Help Message
DTC
Fault Condition/Trigger
(For configurable items, fault applies only if
configured. All listed conditions to be met unless
stated otherwise)
Required Control
Response or State
Assignment
Conditions Required for Movement
and/or to Clear Fault
Summary of Contents for JLG 450AJ
