SECTION 3 - MACHINE CONTROLS AND INDICATORS
3-4
31215036
Ground Control Station
(See Figure 3-1., and Figure 3-2.)
NOTE:
Lift, Swing, Platform Level, Telescope, Jib Lift, Platform Rotator
and Auxiliary control switches are spring-loaded and will auto
-
matically return to neutral (off) when released.
WHEN OPERATING THE BOOM ENSURE THERE ARE NO PERSONNEL AROUND OR
UNDER PLATFORM.
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CONTROL LEVERS OR
TOGGLE SWITCHES CONTROLLING PLATFORM MOVEMENT DO NOT RETURN TO THE
OFF POSITION WHEN RELEASED.
1.
Swing Control
Provides 360 degrees continuous turn
-
table rotation.
2.
Lift Control
Provides raising and lowering of the
boom.
3.
Telescope Control
Provides extension and retraction of the
boom.
4.
Jib
This switch provides raising and lower
-
ing of the jib.
To
order
go
to
Discount-Equipment.com
