SECTION 3 - MACHINE CONTROLS AND INDICATORS
3-10
31215036
Ground Control Console Display Gauge
(See Figure 3-7., Ground Control Console Display Gauge)
The Display Gauge shows engine hours, fuel level (if applicable),
and Diagnostic Trouble Codes (DTCs) from both the JLG Control
System and the engine control system. During machine start up,
with no active DTCs in the control system, the splash screen will
show for 3 seconds and then switch to main screen. If there is an
active DTC while powering up the machine, the splash screen will
show for 3 seconds, and then launch the Diagnostics Screen. The
indicator lamp will light when there is an active DTC in the Fault
Log.
Figure 3-4. Splash Screen
To
order
go
to
Discount-Equipment.com
