SECTION 3 - MACHINE CONTROLS, INDICATORS, AND OPERATION
3-12
31217186
Steering
On the platform control station, position the lift/
drive select switch to the drive/steer position.
To steer the machine, engage trigger switch and
the thumb-operated steer rocker switch
on the
joystick handle. Press to the right for steering
right, or to the left for steering left. When released,
the switch will return to the center (off) position
and the wheels will remain in the previously
selected position.
To return the wheels to the center position, the switch must be acti
-
vated in the opposite direction until the wheels are centered.
Traveling Forward and Reverse
Position the platform lift/drive select
switch to drive/steer position.
Squeeze the trigger switch on front
of the joystick and move the joystick
forward to drive forward, or back
-
ward to drive in reverse.
The drive system is proportional: for additional drive speed, push the
joystick further from the neutral position in the direction of travel.
Releasing the trigger switch or returning the joystick to center will stop
machine movement.
NOTE:
To ensure proper operation of the desired platform function,
move the joystick in the direction of the black or white arrow
that matches the color of the arrow on the chassis for the
intended direction of travel.
Raising And Lowering Platform
1.
If the machine was shut
down, place the key selec
-
tor switch to the platform
position.
2.
Position both emergency
stop switches to the ON position.
3.
Position the lift/drive select switch to lift.
4.
Squeeze and hold the trigger switch and move the joystick
back (platform up - white arrow) or move the joystick for
-
ward (platform down - black arrow) and hold until desired
elevation is reached. Releasing the trigger switch or moving
the joystick back to its center position will stop the function
being operated.
Arm Guards (If Equipped)
If the machine is equipped with electronic arm guards, the platform
will stop lowering at a predetermined height and the machine’s bea
-
cons will flash at a different rate to warn ground personnel. The
machine can continue lowering after a three (3) second delay and re-
engaging the lowering function. Once the lowering function is re-
engaged an audible alarm will sound. After a three second delay, the
platform will continue lowering.
Summary of Contents for JLG ES1330L
