Section 3- Controls and Indicators
3
-
3
31211368
1.
Transmission Control Lever:
See page 3
16.
2.
Instrument Panel:
See page 3
4.
3.
Steering Wheel:
Turning the steering wheel to the left or right steers the machine in
the corresponding direction. Three steering modes are available. See
4.
Horn:
Press to sound horn.
5.
Frame Level Indicator:
Enables operator to determine the left to right level
condition of the telehandler.
6.
Charts/Display/Monitor:
a. Capacity and Maintenance Charts (if equipped): See Section 5- Attachments or
Section 7- Lubrication and Maintenance.
b. Multifunction Display (if equipped): See page 3
32.
c. Reversing Camera Monitor (if equipped): See page 3
30.
7.
Accessory Control lever (if equipped):
See page 3
18.
8.
Right Dash Control Panel:
See page 3
9.
Joystick:
See page 3
10.
Left Dash Control Panel:
See page 3
11.
Service Brake Pedal:
Further pedal is pressed, the slower the travel speed.
12.
Ignition Switch:
Key activated. See page 3
13.
Accelerator Pedal:
Pressing down the pedal increases engine and hydraulic speed.
14.
Frame Level Switch:
Controls left to right frame level of machine. Press right side of
switch to rotate frame right; press left side of switch to rotate frame left.
15.
Outrigger Levers (if equipped):
See page 3
19.
16.
Air Shutoff Valve (ASOV) Test Switch (if equipped):
See page 8
17.
LSI Indicator (if equipped):
See page 3
-
20.
https://www.forkliftpdfmanuals.com/
