SECTION 3 - MACHINE CONTROLS AND INDICATORS
3-22
31215066
17.
Jib Stow
Allows the jib to be returned to the stowed
position for transport and also taken out of
the transport position for machine usage.
This control operates both jib swing and the
jib lock pin in a coordinated manner.
NOTE:
The Jib Telescope function only operates in the 500 lb. (227 kg for
ANSI markets and 230 kg for CE and Australia markets) capacity
mode.
18.
Jib Telescope
Provides extension and retraction of the jib.
19.
Soft Touch/SkyGuard Indicator
Indicates the Soft Touch bumper is against an object or the
SkyGuard sensor has been activated. All controls are cut out
until the override button is pushed. For Soft Touch, controls
are then active in the Creep Mode or for SkyGuard, controls
will work normally.
20.
Platform Rotate
Allows the operator to rotate the platform to
the left or right.
21.
Lock Pin Indicator
When illuminated, indicates the jib is
centered and the jib lock pin is
engaged. When blinking, indicates the
jib is in the process of being stowed or centered. The indica
-
tor is off when the lock pin is disengaged and the jib is
stowed (machine in transport position).
22.
Function Speed Control
This control affects the speed of Main Boom
Telescope, Jib Telescope, and Jib Lift. Turn
-
ing the knob all the way counterclockwise
until it clicks puts Drive, Main Lift, Platform
Rotate, and Swing into Creep mode.
To
order
go
to
Discount-Equipment.com
