SECTION 3 - MACHINE CONTROLS AND INDICATORS
31215066
3-27
10.
Glow Plug Indicator
Indicates the glow plugs are operating. After
turning on ignition, wait until light goes out
before cranking engine.
11.
Fuel Level Indicator
Indicates the level of the fuel in the fuel tank.
12.
Jib Lock Pin Indicator
When illuminated indicates the jib lock pins are
set in place.
13.
Engine Emissions System Failure Indicator
Icon illuminates when there is a fault with the
Emissions After Treatment system.
14.
Level System Indicator
Indicates a fault in the electronic leveling system.
The fault indicator will flash and an alarm will
sound. All functions will default to creep if the boom is
extended past transport mode or elevated more than 8
degrees above horizontal.
15.
Platform Overload Indicator
Indicates the platform has been overloaded.
16.
Wire Rope Service
When illuminated, the light indicates the wire
ropes are loose or broken and must be repaired
or adjusted prior to use.
17.
Axles Set Indicator
Indicates the axles are fully extended. The indica
-
tor will flash as the axles are extending or retract
-
ing and be solid when fully extended. The indicator icon will
go out when the axles are fully retracted.
F
½
E
!
To
order
go
to
Discount-Equipment.com
