SECTION 6 - ACCESSORIES
6-8
31215048
• Ensure no personnel are beneath platform.
• Do not exit platform over rails or stand on rails.
• Use this option only on approved models.
• Keep lanyard attached at all times.
• Use correct cutting settings.
• Do not use electrical cords without ground.
• Do not use electrical tools in water.
• Do not cut platform, or ground through the platform.
• Wear proper cutting apparel.
• Do not drive machine while connected to external air/gas
sources.
Preparation and Inspection
• Connect ground clamp to metal being cut.
• Ensure there is a good ground connection.
Operation
Start the engine, turn on the generator, then turn on the plasma
cutter.
Refer to the Miller Plasma Cutter Owner’s Manual (PN 3128420)
for more information.
6.5
SKYGLAZIER
™
SkyGlazier™ allows glaziers to position panels efficiently. The gla
-
zier package consists of a tray that attaches the bottom of the
platform. The panel rests on the tray and against top-rail of the
platform, which is padded to prevent damage. SkyGlazier™
includes a strap to secure the panel to the platform rail.
To
order
go
to
Discount-Equipment.com
