SECTION 1 - SAFETY PRECAUTIONS
1-10
31215048
Crushing and Collision Hazards
• Approved head gear must be worn by all operating and
ground personnel.
• Watch for obstructions around machine and overhead when
driving. Check clearances above, on sides, and bottom of plat
-
form during all operations.
• During operation, keep all body parts inside platform railing.
• Use the boom functions, not the drive function, to position the
platform close to obstacles.
• Always post a lookout when driving in areas where vision is
obstructed.
• Keep non-operating personnel at least 6 ft. (1.8m) away from
machine during all operations.
• Under all travel conditions, the operator must limit travel
speed according to conditions of ground surface, congestion,
visibility, slope, location of personnel, and other factors.
• Be aware of stopping distances in all drive speeds. When driv
-
ing in high speed, reduce drive speed before stopping. Travel
grades in low speed only.
• Do not use high speed drive in restricted or close quarters or
when driving in reverse.
• Exercise extreme caution at all times to prevent obstacles from
striking or interfering with operating controls and persons in
the platform.
• Ensure that operators of other overhead and floor level
machines are aware of the MEWP’s presence. Disconnect
power to overhead cranes.
• Do not operate over ground personnel. Warn personnel not to
work, stand, or walk under a raised boom or platform. Position
barricades on floor if necessary.
To
order go
to
Discount-Equipment.com
