SECTION 1 - SPECIFICATIONS
3121623
– JLG Lift –
1-5
Hatz Engine 1B40 Specifications
Perkins Engine 402D Specifications
Air cleaner
Dual element type
Governor
STR (Self Tuning Regulator) governor
Fuel used
Unleaded gasoline with a pump octane rating 86 or higher
Table 1-7.
Specifications Honda Engine iGX440
Model
iGX440U
Table 1-8.
Specifications Hatz Engine 1B40
Type
1B40
Design
Air-cooled four-stroke diesel engine
Combustion system
Direct injection
Number of cylinders
1
Bore / stroke
88 / 76 mm
Displacement
462 cm
3
Lubricating oil capacity without oil sump:
with oil sump:
1.5
1)
l, approx.
3.2
1)
l, approx.
Difference between “max” and “min” levels without oil sump:
with oil sump:
0.8
1)
l, approx.
2.2
1)
l, approx.
Lubricating oil consumption (after running in)
1% of fuel consumption at full load max.)
Lubricating oil pressure (oil temperature 100 °C)
2.5 bars at 3000 r.p.m. (approx.)
Direction of rotation, power take-off end
anti-clockwise
Valve clearance 10 - 30 ° C - Inlet and exhaust valve
0.10 mm
or automatically
2)
Max. tilt angle in operation, in direction
Flywheel 25° down
3)
all other directions 35°
3)
Weight (incl. fuel tank, air-cleaner, exhaust silencer, recoil starter
and electric starter)
55 kg approx.
Battery capacity
max. 12 V / 60 Amp/h
Table 1-9.
Specifications Perkins Engine 402D
Type
402D-05 Engine
Maximum Operating Speed (rpm)
3600 rpm
Cylinders and Arrangement
In-Line two cylinder
Bore
67 mm (2.64 inch)
Stroke
72 mm (2.83 inch)
Displacement
0.507 L (30.939 in3)
Aspiration
NA
(1)
Compression Ratio
23.5:1
Firing Order
1-2
Rotation that is viewed from the flywheel
Counterclockwise
Valve Lash Setting (Inlet)
0.20 mm (0.008 inch)
Valve Lash Setting (Exhaust)
0.20 mm (0.008 inch)
Injection
Indirect
Go
to
Discount-Equipment.com
to
order
your
parts
