SECTION 3 - CHASSIS & TURNTABLE
3-18
– JLG Lift –
3121623
Figure 3-30.
Location of the Engine oil level sensor
For additional instruction refer to the Engine Service Man-
ual for a complete troubleshooting.
Engine Harness By-Pass
With these Instructions the engine harness is discon-
nected from the machine harness.
Figure 3-31.
On engine left side removes the two bolts and the gray
plate to access to the harness, and recognize the wires
with white plug connectors.
Figure 3-32.
Disconnect the white plugs of the engine harness from
the machine harness.
Figure 3-33.
Connect together the two white plugs of engine harness.
Figure 3-34.
Start the engine with the manual rope recoil starter.
Go to
Discount-Equipment.com
to
order your
parts
