SECTION 3 - CHASSIS & TURNTABLE
3121623
– JLG Lift –
3-25
Technical data
1)
These values are intended as an approximate guide. The max. marking on the dipstick is the deter-mining factor.
2)
Depending on model (see maintenance charts).
3)
Exceeding these limits causes engine breakdown.
Tightening torques
Type
1B40
Design
Air-cooled four-stroke diesel engine
Combustion system
Direct injection
Number of cylinders
1
Bore / stroke
mm
88 / 76
Displacement
cm3
462
Lubricating oil capacity without oil sump with oil sump
l, approx.
l, approx.
1.5
1)
3.2
1)
Difference between “max” and “min” levels without oil sump with oil sump
l, approx.
l, approx.
0.8
1)
2.2
1)
Lubricating oil consumption (after running in)
max.
1% of fuel consumption at full
load
Lubricating oil pressure (oil temperature 100 °C)
approx.
2.5 bars at 3000 r.p.m.
Direction of rotation, power take-off end
anti-clockwise
Valve clearance 10 - 30 °C
Inlet and exhaust valve
mm
0.10
or automatically
2)
Max. tilt angle in operation, in direction
Flywheel 25° down
3)
all other directions 35°
3)
Weight
(incl. fuel tank, air-cleaner, exhaust silencer, recoil starter and electric starter)
kg, approx.
55
Battery capacity
Amp/h
max. 12 V / 60 Amp/h
Item
Nm
Oil drain plug
50
Go
to
Discount-Equipment.com
to
order
your
parts
