Optical Scientific Inc
OFS 2000CW User’s Guide
P/N 1910-905
Rev. 03/28/13
60
12 Spare Parts
12.1 Recommended Spare Parts
For OFS installations where multiple units are installed or where it is “process critical”, We recommend
purchase of an entire unit as a spare to keep downtime to a minimum. For installations where a short down-
time is acceptable, we recommend these spares, shown below along with the complete table of available
spares. The recommended spares list is ordered based on an industry-wide average of needed replacement
modules over the past ten years
1
Receiver (RX) Amplifier PCB, p/n 1910-213
2
Transmitter (TX) Driver PCB, p/n 1910-113-2
3
Quartz Glass Window Kit with Heater, p/n 1910-115-1
4
Window Retaining Ring w/ Gaskets & Screws, p/n 1910-808
5
Control/Interface (DSP) PCB p/n 1910-311-1
6
Digital Signal Processor (DSP) PCB p/n 2827-312
12.2 Available Spare Parts
Unit
Sub Assembly
P/N
TX Head Unit
Complete TX Head Assembly
1910-100-1
TX LED Module
1910-110-1
TX Adjuster Mount (incl. LED module)
1910-111-1
TX Driver PCB (w/AGC f/-CW Model)
1910-113-2
RX Head Unit
Complete RX Head Assembly
1910-200
RX Preamp w/optics assembly and stub
1910-210
Receiver Amplifier PCB
1910-213
Receiver Cable (nnn = overall length in feet)
1910-217-nnn
TX/RX Head
TX/RX Adapter Flange Mount
1910-116
Quartz Glass Window Kit with Heater (one window)
1910-115-1
Window Retaining Ring w/gaskets & screws
1910-808-1
4 inch Kevlar Flange Gasket (min. order 2)
FS-1456-00
Control Box
Complete NEMA4 Control Unit Assembly
1910-302-1
Control/Interface PCB
1910-311-1
DSP Circuit Board
2827-312
AC Power Supply
MP-1010-00