4. SYSTEM INSTALLATION
1.
Pull the front panel and extract upward.
2.
Turn the buckles and remove both pieces of filter.
3.
Remove all packaging bags.
4.
Place Filter 2 (antimicrobial and HEPA compound
filters) back into the inner side of the product.
Note: Please ensure the tab side is facing you.
5.
Place filter 1 (cold catalyst and activated carbon
compound filters) back into the inner side of the product.
Note: Please ensure the tab side is facing you.
6.
Make sure the filters are installed in position. Turn the
buckles to fix the filters.
7.
To install the front panel, place the top into the host
buckle and close the front panel. The front panel will be
held by in-built magnets.
03
USER’S MANUAL
EN
1
6
7
8
4
2
5
3
9
10
11
12
13
FRONTAL
REAR
SIDE
1
2
3
4
5
6
7
