ERGOFIT - INSTRUCTIONS
1.
SEAT HEIGHT
2. BACK ANGLE
3. SEAT TILT ADJUSTMENT
Lift the lever on the right-hand side
and take your weight off the seat to
raise the height. Remain seated to
lower the height. Release the lever
to lock the seat height.
To adjust the angle of the backrest,
lift the rear lever on the right-hand
side and lean the backrest to the
desired position. Return the lever to
the downward position to lock the
backrest in place.
Lift the middle lever on the right-
hand
side to release the seat tilt lock.
Tilt the seat while seated. Push the
lever back down to lock the seat
tilt.
4. SEAT ROCK TENSION
5. BACK HEIGHT
6. LUMBAR SUPPORT
Twist the knob on the underside of
the chair while in seat tilt
adjustment mode to adjust the
tension of the movement.
To adjust the height of the backrest,
grasp the bottom of the backrest
and raise to the desired height. To
allow the backrest to be lowered
again, raise the backrest all the way
to the top and lower it to its lowest
position.
As you are sitting on the chair
squeeze bulb, located underneath
the left-hand side of the seat,
repeatedly to inflate the lumbar
support. Press the button on the
bulb to deflate the lumbar support.