7. PELVIC SUPPORT
8. SEAT DEPTH
9. ARMREST HEIGHT
As you are sitting on the chair
squeeze the right-hand bulb
repeatedly to inflate the pelvic
support. Press the button on the
bulb to deflate the lumbar
support.
Push in the button on the
right-hand side and slide the
seat forward or backward.
Release the button to lock the
seat pan.
To adjust the height of the
armrest press the button on the
side of the armrest and lift or
lower to the desired position. The
armrest will lock in to a total of
six different heights.
10. ARMREST WIDTH
Loosen the screw on the
underside of the arm by
turning it anti-clockwise and
move the arm to the desired
width, tighten the screw in an
clockwise direction to lock in
to position.
11. ARMREST ROTATION
12. NECKREST(IF FITTED)
Rotate the arm pad until it
locks at the desired position.
Rotate the cushion up or down
for varying support.