7
3.3.1 Delivery
3.3.2 Wall bracket
The product is designed to be hung on the
wall and is supplied with a stainless steel wall
bracket from the factory. Original wall brackets
must be used for installation.
The product should be transported carefully as
shown, with packaging. Use the handles in the box.
!
CAUTION
Pipe stubs, valves etc. should not be used to
lift the product as this could cause malfunc-
tions.
3.4 Requirements for installation location
and positioning
!
CAUTION
!
The product should be placed in a room with a drain, in accordance with the wetroom standard / latest
TEK. Alternatively, fit an automatic stop valve with sensor and overflow from safety valve to drain.
!
The product should be placed in a dry and permanently frost-free position.
!
The product should be fixed to a wall structure suitable for the total weight of the product when in operation.
!
Min. distance from ceiling to wall bracket is 35 cm to allow space for hanging. See diagram below.
!
The product must have a clearance for servicing of 40 cm in front of the cover / 10 cm under the mixer
valve.
!
The product should be easily accessible in the home for servicing and maintenance.
Min.
40 cm
Min. 10 cm
Min.
35 cm
Min. 40 cm
