Operation
________________________________________________________________________________
page 7
OSRAM operating instructions DALI Repeater LI
Indication LED
Within the subsequent table all possible states of the LED are listed and there meaning is described.
LED state
Meaning
Cause
green Normal
operation
flashing
green/yellow
Testing function active
Testing function was activated by a short press
on the service button.
flashing
red/green
No DALI device at the
output detected
Broken wire connection at the output side or
interruption of mains supply of the connected
DALI devices.
yellow
Lamp failure
At least one of the connected DALI devices is
indicating a lamp fail.
flashing
yellow
Initialising (detection of
highest minimal dimming
level)
Initialise process was started by a long press on
the service button.
flashing
red
Overload
More than 64 DALI devices were connected to
the output.
red
Short cut
A short cut at the DALI output is detected.
