One Stop Systems
ExpressBox 3T- eGPU | 23
2.3
Installation on Windows PC
1.
Install Thunderbolt Software. Go to Software Installation chapter. When done installing the software, firmware and Windows updates,
proceed to step 2.
2.
Plug in the GPU card into PCIe slot. Slowly push the card down until it is seated firmly into the slot.
3.
Secure the GPU card.
4.
Attach the aux power cables to the GPU
5.
Connect all external monitors to the eGPU. Plug in the DP cable to the cable port of the eGPU.