20
Figure 8.8.
Set Time screen.
6.
Once the timer has been set, press the
START
button to run the program. The LCD will
display the following information (as shown in
Figure 8.9
).
I.
The
Elapsed
timer will begin and the LED indicator light will switch on.
II.
When the
Elapsed
time matches the
Set Time
, the one-note buzzer will sound
—
indicating the program has finished.
III.
While the program is running, the user can stop the program by pressing the
STOP
button. This will also reset the
Set Time
to 00:00.
Figure 8.9
. Set Time screen.
7. The fan in the unit will turn on when the cleaning program is started and will turn off once
the STOP button is pressed if the Tray Temperature is below
27°C. If the Tray Temperature reads
above 27°C, the fan will remain on for a further 20 minutes.