13
7. Installation
1. Place the unit on a solid, level surface. Ensure the area is free from vibrations, temperature extremes
and highly flammable or explosive materials. Make sure the chuck is also level.
2. Before plugging in the spin coater, ensure the power switch on the unit is switched to the ‘0’
position (off).
3. Connect the power adapter to the power jack on the back panel of the Spin Coater unit (see
Figure 7.1
).
4. Refer to the label on the power adapter for electrical requirements.
5. Switch the Spin Coater power switch to the ‘I’ position to turn the unit on.
Figure 6.3.
The Ossila Spin Coater chuck.
Figure 7.1.
Connecting the power adapter to the power jack on the back panel of the unit.
Summary of Contents for Spin Coater
Page 22: ......
