7
• Start walking within parallel bars. As confidence increases, start
walking outside of the parallel bars.
• As the user has improved control of their prosthesis running can be
initiated. The hydraulic mechanism adapts to changes in speed.
MAINTENANCE
The device is designed for low-maintenance. The device should be
inspected every six months for signs of unusual wear, by a prosthetist
familiar with the product.
If the knee is subjected to excessive moisture or corrosive environment,
it’s recommended to clean and lubricate the knee frequently.
Cleaning
Wipe knee with soft cloth moistened with small amount of kerosene.
DO NOT use solvent stronger than kerosene. If kerosene is not available,
use general purpose oil (3 in 1) or sewing machine oil.
Precaution:
Do not dip knee or pour solvent over knee. Bearings and
seals may be damaged.
Precaution:
Do not use compressed air to clean knee. Air forces
pollutants into bearings and may cause malfunctions and wear.
Lubrication
Two sets of roller bearings are visible, see Fig. 2 (11). Place a few drops of
machine oil on the roller bearings (general purpose oil (3 in 1) or sewing
machine oil can also be used). Move the knee several times and wipe off
excessive oil with a soft cloth. No other parts need external lubrication.
WARRANTY
The device is warranted against defective materials and workmanship for
18 months.
SPECIFICATIONS
Structural Specifications
Product weight: 0.62 kg (1.37 lbs)
Dimension:
(Fig. 1)
Build height: 108 mm (4.2")
Max Knee flexion available: 110 degrees
Usage Environment
• Environmental operating temperature: -10 °C (+15 °F) to 40 °C (104 °F)
• Operating humidity: 0%–100% Relative humidity.
• Shipping and storage temperature: -15 °C (+5 °F) to 50 °C (+122 °F).
• Storage humidity: 10%–95% Relative humidity (non-condensing)
Caution:
The knee should not be used in a dusty environment. Exposure
to sand, talcum, water or other substances that may interfere with knee
functionality should be avoided.
LIABILITY
The manufacturer recommends using the device only under the specified
conditions and for the intended purposes. The device must be
maintained according to the instructions for use. The manufacturer is
not liable for damage caused by component combinations that were not
authorized by the manufacturer.
Summary of Contents for CHEETAH KNEE
