44
1. Remove the 2 screws and the wall bracket
from the HERU
®
K.
2. Install the supplied 5x10mm sealing strip as
shown.
3. Attach the two supplied rubber cushions
to each lower corner of the rear of the unit
according to dimensions H = 57mm.
4. Mount the wall bracket on the upper edge, the hole
721mm from the underside of the upper cabinet.
5. Angle the bottom of the unit, place the unit
on the Wall Bracket, slide back the bottom of
the unit towards the lower distance.
6. Lock the unit into the wall
bracket with 2 screws.
ASSEMBLY INSTRUCTION FOR HERU
®
K
Rubber cushion
Sealing strip 5x10
1270421_utg2_HERU_K_SV_EN.pdf 44
2018-03-12 10:00:17
Summary of Contents for HERU 70 K EC
